Takao Fujiwara [Tue, 11 Dec 2018 07:18:59 +0000 (16:18 +0900)]
inputMethod: Delete the enabled member since it's not used
When `ibus restart` runs, InputMethod.enabled is changed to false
and no longer enable ibus but 'enabled' and 'disabled' signals
are not used in the current IBus clients and it's good to delete
the member simply.
Florian Müllner [Thu, 15 Nov 2018 14:38:11 +0000 (15:38 +0100)]
keyboard: Use addSettingsItem() in language menu
If the session mode doesn't allow access to Settings, the language
menu should respect that and not expose the "Region & Languages"
panel. Using the dedicated method instead of manually constructing
the menu item takes care of that and makes for less code.
Carlos Garnacho [Thu, 13 Dec 2018 19:37:24 +0000 (20:37 +0100)]
global: Drop API to play sounds
All callers have been updated to use MetaSoundPlayer. This drops direct
usage of libcanberra-gtk, and the X11 connection indirectly. One thing
worth noting is that we pass less metadata (eg. event x/y that might be
used for surrounding effects). This was all largely unused, so the
MetaSoundPlayer was made simpler.
Carlos Garnacho [Thu, 13 Dec 2018 19:32:16 +0000 (20:32 +0100)]
messageTray: Port to MetaSoundPlayer for emitting sounds
Move away from ShellGlobal API, which is too tightly coupled to
libcanberra-gtk. The app ID/name seem unused in canberra, so we
may simplify this to a single case.
Jonas Ådahl [Thu, 3 Jan 2019 10:53:13 +0000 (11:53 +0100)]
dnd: Repick target actor if destroyed mid iteration
The picked target actor may be destroyed (e.g. hover style change
resulting in the ClutterTexture to be destroyed). If we don't handle
this, GJS will abort when it sees the exception caused by Javascript
code trying to access the destroyed target actor.
To handle it, listen on the 'destroy' signal on the target actor, and
repick, so a valid actor is passed to the next motion callback.
When a fullscreen application is focused,
toggling the overview via hot-corner is disabled,
even when the overview is currently visible.
This only makes sense, when the overview is
hidden to not to disturb the behaviour of the
fullscreen application, but leaves an
inconsistency when the overview is visible since
it should work there like when a non-fullscreen-
application is focused.
So, always allow hiding the overview using the
hot corner when the overview is visible.
Olivier Fourdan [Wed, 12 Dec 2018 15:02:29 +0000 (16:02 +0100)]
introspect: Add GetWindows method
The `GetWindows` method gives access to the list of windows for each
application with some of their properties, so utilities such as dogtail
can pick the window of their choice to interfere with using the provided
window id.
Jonas Ådahl [Wed, 5 Sep 2018 09:15:30 +0000 (11:15 +0200)]
Add app introspection API
Add a D-Bus API that allows the API user to introspect the application
state of the shell. Currently the only exposed information is list of
running applications and which one is active (i.e. has focus).
The browser plugin is crashy and broken; there are dozens of bugs filed
against it on Bugzilla and nobody is looking at them. Chrome and Firefox
have both dropped support for NPAPI plugins. Epiphany still has support,
but it's hidden behind a gsetting and all the UI to enable it has been
removed, so very few users would be able to figure out how to enable.
I've even previously considered blacklisting this plugin in the past due
to all the crashes.
Since this plugin has not actually worked in any browsers for a long
time now, time to delete it.
Florian Müllner [Thu, 22 Nov 2018 17:18:34 +0000 (18:18 +0100)]
messageTray: Re-enable unredirection when banner is destroyed
The intention of commit 4dc20398 was to disable unredirection while
banners are shown, but the ::done-displaying signal currently used for
re-enabling unredirection is only emitted under some circumstances, so
it's possible that unredirection is left disabled indefinitely, whoops.
Fix this by tying disabling unredirection explicitly to the lifetime
of the banner actor.
Florian Müllner [Thu, 22 Nov 2018 19:41:44 +0000 (20:41 +0100)]
st: Avoid integer overflow on unpremultiply
When computing the effective border color, we operate on colors with
premultiplied alpha to simplify the calculations, then unpremultiply
the result. However we miss a bounds check in the last check, so any
color component can overflow the allowed maximum of 0xff and shift the
result in unexpected ways.
Cosimo Cecchi [Wed, 21 Nov 2018 02:25:51 +0000 (18:25 -0800)]
StWidget: don't forget to invalidate the paint state if not on stage
If the actor is not on the stage yet (i.e. does not have a theme
node), but has a paint state cached, we currently fail to invalidate
it, which will lead to the actor painting with old contents once it
gets onto the stage.
This commit fixes the issue by changing our invalidation strategy;
previously we were looking at the widget's own theme node to determine
if it should be invalidated or not.
Now we look at the theme nodes of our cached paint states. When the
widget is mapped on stage, those are the same as the widget's own
theme node, but when the widget is not on the stage, we'll still be
able to invalidate them.
As part of this, we move the invalidation API to StThemeNodePaintState,
which is a more natural place for our use case.
Daniel van Vugt [Fri, 23 Nov 2018 08:43:34 +0000 (16:43 +0800)]
iconGrid: Eliminate JavaScript for painting/picking
The only reason for `vfunc_paint` and `vfunc_pick` existing was to
implement a culling optimization. Although that optimization actually
made performance worse than none at all because it forced the painting
and picking cycles to spend more time calling into JavaScript.
Turns out we don't have to choose between native code and culling though.
Just reimplement the culling using native ClutterActor functions and we
get the benefits of both.
Performance on an i7-7700:
Moving the cursor over the icon grid:
Before: 70% CPU, 5.5ms per frame
After : 60% CPU, 4.5ms per frame
Scrolling the icon grid:
Before: 60% CPU, 4.4ms per frame
After : 50% CPU, 3.3ms per frame
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/174
In X11, pointer emulated touch events are replicated with normal PRESS, RELEASE
pair events which are generated by the server. Thus for a single tap we get:
- TOUCH_BEGIN -> TOUCH_END, PRESS -> RELEASE
This will cause st-button to send two "clicked" signals, instead of just one,
breaking extensions (like dash-to-dock) that show buttons in the main stage
which will be checked two times or that will receive the same signal two times.
Andrea Azzarone [Fri, 16 Nov 2018 18:31:56 +0000 (18:31 +0000)]
dash: destroy items's child before tooltip
Destroy the DashItemContainer's child from the same handler as the tooltip. This
will prevent invalid reads when the item is destroyed while its quicklist is
still open.
Florian Müllner [Thu, 15 Nov 2018 17:47:55 +0000 (18:47 +0100)]
ibusManager: Don't pass undefined callback to ibus
Since commit 551e8278416, we don't always pass a callback parameter.
However passing it on as undefined to ibus doesn't work, as gjs doesn't
accept that as a valid callback value and throw an error. As a result,
we can end up with no layout selected in the keyboard menu and an "empty"
indicator. Fix this by explicitly passing null if no callback has been
provided.
Back in the day, there was a proposed system of tracking apps in a
specific context.
The inspiration was that you may have used apps in multiple modes:
Firefox may have been used in both "Programmer Reference" and
"Kitten Videos" contexts. Early user response to the feedback wasn't
too positive - context switching is something that humans have trouble
doing implicitly, let alone explicitly. The old codebase still has a
few remnants of this around; let's finally put them to rest.
Note that we still write out a dummy context tag to the XML file - old
versions of the shell will flat out crash if you don't have one of those
in there, so just leave it in for compatibility sake.
power: Label the PENDING_CHARGE state as "Not Charging"
The pending-charge state means AC power is on but the battery is not
being charged. This can happen because its charge is above a certain
threshold, to avoid short charging cycles and prolong the battery's
life, or because the PSU is not powerful enough to charge the batteries.
Instead of lying to the user about something being estimated, we should
simply tell the truth and set the label to "Not Charging".
workspace: Confine caption width to workspace area
When we started to only show a single caption at a time, we allowed
title captions to be wider than their corresponding window preview.
But while overlapping neighboring previews is fine, we shouldn't
allow the captions to leak outside the workspace area itself and
overlap unrelated elements like workspace switcher or dash.
Erik Duxstad [Mon, 5 Nov 2018 23:13:26 +0000 (17:13 -0600)]
windowManager: make TouchpadWorkspaceSwitchAction respect natural-scroll
Instead of defaulting to a natural scroll behavior,
have the workspace switch action use the natural-scroll setting
in org.gnome.peripherals.touchpad to determine the correct
direction of travel when swiping. 4 finger swipes will then
match the behavior of the rest of the UI.
notificationDaemon: support file:// or icon theme names for image-path
While this sounds counter-intuitive, the image-path hint value might also
be used with URIs or icon names.
As per freedesktop standard:
The "app_icon" parameter and "image-path" hint should be either an URI
(file:// is the only URI schema supported right now) or a name in a
freedesktop.org-compliant icon theme (not a GTK+ stock ID).
Thus the image-path hint should also be parsed as it happens for the
app_icon.
Reuse same logic, by falling back on _iconForNotificationData with the
hint value.
cogl_texture_new() is used in a few places in GNOME Shell, but
it's a deprecated Cogl function. The replacement is the less
verbose cogl_texture_2d_new_with_size(), that is very much a
straightforward replacement.
Remove the few places where this function is used, replacing
it by the CoglTexture2d counterpart.
Cosimo Cecchi [Thu, 11 Oct 2018 02:08:38 +0000 (19:08 -0700)]
calendar: do not call destroy() recursively
We have a callback that will call close() when the notification is
destroyed, and a callback that will call destroy() on the notification
when the message is closed.
Currently, if the notification is destroyed we'll execute our callback
that will call again destroy() on the notification. That's bad
practice in general, and it also has the side effect of resetting the
destroy reason.
This commit avoids re-destroying the notification by dropping the
notification reference on destroy.
Cosimo Cecchi [Thu, 11 Oct 2018 01:26:31 +0000 (18:26 -0700)]
notificationDaemon: use different reason when replacing notification
Differently from the fd.o notifications, Gtk notifications do not
have a mechanism to update themselves. Instead, when a new
notification is received for an ID already known to the notification
daemon, the old notification is dismissed and a replaced with a new
one.
Currently though, there is no way to distinguish a notification that
was dismissed because of an user interaction, or because it was
replaced. That is an useful piece of information, so add a new value
to the NotificationDestroyedReason enum to account for it.
Cosimo Cecchi [Fri, 9 Nov 2018 21:55:53 +0000 (13:55 -0800)]
StTextureCache: use right event to detect file changes
StTextureCache installs file monitors that invalidate caches when
contents of the underlying file change.
At the moment, the cache uses the Gio.FileMonitorEvent.CHANGED event
type to make that determination.
However, that is suboptimal for at least two reasons:
- while a file is being written to disk, many CHANGED events will be
emitted in sequence. That will cause needless cache invalidations,
and we will risk loading the file before it's fully loaded.
- if an existing file is replaced, e.g. with g_file_replace(), we may
not get a CHANGED event but a CREATED one instead, so the cache ends
up never getting invalidated.
The good news is that in both of those cases GFileMonitor will send a
CHANGES_DONE_HINT event after changes have settled, or after the file
is replaced.
This commit fixes both cases by switching from the CHANGED event to
CHANGES_DONE_HINT to determine that a file has in fact changed.
Takao Fujiwara [Fri, 31 Aug 2018 11:22:23 +0000 (20:22 +0900)]
keyboard: Do not call KeyboardManager.holdKeyboard() with set-content-type
When gnome-shell receives the signal of 'set-content-type' from ibus,
gnome-shell calls KeyboardManager.holdKeyboard() and
KeyboardManager.releaseKeyboard() and the functions change the current
input focus in GNOME Xorg and it could result in closing a popup window
which has a password entry by focusing on the entry.
The solution is to stop to call the APIs on 'set-content-type' signal.
Florian Müllner [Sun, 12 Aug 2018 23:25:13 +0000 (01:25 +0200)]
messageTray: Disable unredirection while showing banners
We don't usually show notification banners while the monitor is in
fullscreen, but when we do - the notification is urgent - we should
actually show the banner, even if the top-most window is unredirected.
To achieve that, disable unredirection while the banner is showing.
If the initialization fails for some reason, for example by
running 'gnome-shell --replace', we should not crash because
of an attempt of unregistering an unregistered agent handle.
Fix that by checking if the handle is not NULL before calling
the unregistering routines.
Daniel van Vugt [Fri, 12 Oct 2018 04:00:31 +0000 (12:00 +0800)]
iconGrid: Keep icons reactive during pulse animation
The `reactive` property of icon actors was being restored multiple times
over the course of the pulse animation, all at slightly different times
as each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a pulse animation, limiting its smoothness and performance.
The solution is to not toggle the `reactive` property in the pulse
animation at all, which avoids incurring multiple full stage relayouts.
As a bonus, this means the icon under the cursor pulses with the correct
selection highlight, appearing more seamless and responsive.
Daniel van Vugt [Fri, 5 Oct 2018 09:09:22 +0000 (17:09 +0800)]
iconGrid: Defer and group animation cleanup
The `reactive` property of icon actors was being restored 24 times over
the course of the spring animation, all at slightly different times as
each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a spring animation hogging the CPU and limiting the frame rate.
The solution is defer and batch the cleanup for all icons until after the
last icon has finished animating. This way the CPU impact of the style
change and stage relayout isn't felt during the animation so the frame
rate remains higher and smoother. The overall CPU usage of the animation
is also reduced as the remaining relayouts are much more likely to be
grouped into a single frame.
Icon spring animation performance on an i7-7700:
Before: 83% CPU and 47 FPS
After : 78% CPU and 54 FPS
which is about a 22% increase in performance per clock (FPS/CPU).
The switcher popup is a large, mostly transparent actor that
should cover all the clickable area of GNOME Shell. In Clutter
terms, it should cover the whole stage.
By binding it to the primary monitor, the Alt+Tab behavior
becomes a bit inconsistent. For example, by not hiding when
clicking at empty spaces at other monitors.
Fix that by binding the SwitcherPopup to the whole stage,
and not only the primary monitor.
Sebastian Pinnau [Thu, 11 Oct 2018 17:14:25 +0000 (19:14 +0200)]
automountManager: Add handling of udisks errors for no/wrong passwords
If no password or a wrong password is entered after automounting an
encrypted device, then the password should be reasked. However, this
does not happen because the relevant udisks error messages for this
cases are missing in the exception handler that calls _reaskPassword.
Fix this issue by adding the relevant udisks error strings to the
exception handling in the _onVolumeMounted method.
verdre [Sat, 20 Oct 2018 15:21:02 +0000 (17:21 +0200)]
build: Include params.js in portal-helper gresources
Fix a regression causing the portal helper to crash.
In 94423151b2e1f5e2ee8ccc884c52f50673db5fb9 we moved the dbus interface
descriptions into seperate files which is why we had to include the
fileUtils js module. This module imports the params js module, so add
params.js to the gresources file for the portal helper.
Florian Müllner [Tue, 23 Oct 2018 14:05:01 +0000 (16:05 +0200)]
panel: Also ignore hidden windows for proximity
We currently only ignore minimized windows, not windows that are
hidden for other reasons - namely on wayland windows are initially
hidden until they are placed.
This fixes a flicker in the transparent top bar on wayland when the
"position" of an unplaced window wrongly suggests the window is
overlapping the top bar.
Carlos Garnacho [Mon, 22 Oct 2018 22:06:36 +0000 (00:06 +0200)]
keyboardManager: Avoid idempotent calls to meta_backend_set_keymap()
But still try to apply the keymap whenever the input sources changed. This
is a different approach to gnome-shell#240 that still avoid redundant
changes to the current keymap, but actually trigger one when input sources
are added.
Since we started to show OSD windows on all monitors, OSD windows are
destroyed when the corresponding monitor is disconnected. We shouldn't
leave any signal handlers around in that case - they prevent the object
from being garbage collected, and trigger warnings for accessing proper-
ties of invalidated GObjects.
Didier Roche [Thu, 18 Oct 2018 15:26:03 +0000 (17:26 +0200)]
osdWindow: Ensure we setMaxLevel before setting Level itself
When maxLevel is > 100%, first OSD appearance was capping the current
level to 100%. Consecutives key press were then OK.
Ensure we setMaxLevel before setting Level itself, so that correct cap
value is applied.
Sergio Costas [Sun, 14 Oct 2018 12:05:04 +0000 (14:05 +0200)]
Fix enumeration in HACKING.md
The HACKING.md file contains an enumeration in the Indentation and
whitespace section, but the sentences look incorrectly divided.
This patch proposes a fix for that section, reordering all its
contents in a single enumeration, instead of a paragraph and
an enumeration, and also reconstruct the sentences.
Florian Müllner [Thu, 11 Oct 2018 18:12:54 +0000 (20:12 +0200)]
appFolder: Don't block all shortcuts
App folder popups take a grab when opened, and as we don't pass any
particular pushModal() parameters, all keybindings are blocked. While
this makes sense for most keybindings that would interfere with the
popup interaction, others like volume/brightness keys or screenshots
can be allowed safely.
Andrea Azzarone [Wed, 12 Sep 2018 20:13:04 +0000 (22:13 +0200)]
popupMenu: Handle keypress if numlock is enabled
Add exception to handle a keypress if numlock is enabled as we already do for
capslock. This uses Clutter.ModifierType.MOD2_MASK because at the moment there
is not a more explicit way to refer to the numlock mask.
panel: Delegate container destruction to PanelMenu.ButtonBox
Instead of taking care of the PanelMenu.ButtonBox.container
destruction by itself, delegate that to the very object that
created it in the first place: PanelMenu.ButtonBox itself.
st-bin: Destroy child in ClutterActor:destroy vfunc
According to Clutter documentation, "[…] actors implementing the
ClutterContainer interface should override the default implementation
of the class handler of this signal and call clutter_actor_destroy()
on their children."
StBin was doing that in GObject:dispose() instead. Move the child
destruction to a new ClutterActor:destroy() vfunc override.
This is the last remaining usage of Shell.GenericContainer
in the codebase, and posed small challenges compared to the
other removals.
A new St.Widget subclass called InputSourceIndicatorContainer
was added as a replacement to the Shell.GenericContainer. It
was needed because GNOME Shell needs to override the regular
size allocation functions, but InputSourceIndicator already
is a St.Widget with its own size allocation overrides.
The test doesn't look and behave like before, but they are
already broken in master anyway. This commit makes it work
without Shell.GenericContainer, but the test itself remains
to be fixed.
Because we're late in the cycle, and don't know how many
extensions actually rely on this API, this commit adds
back the BoxPointer.show() and .hide() functions, with
warning messages to notify consumers that this is going
to be removed.
Pretty much like dd4709bb2, BoxPointer's show() and hide()
functions will clash with Clutter.Actor's ones.
In addition to that, on a conceptual level, the current API
is not great, because calling boxPointer.hide() won't result
in boxPointer.actor.visible == false.
For these reasons, rename show() and hide() to open() and
close(). A compatibility layer will be added in a following
commit, warning about the usage of show() and hide().
LayoutManager is currently a pure JavaScript class that
relies on the rudimentary Signals.addSignalMethods() to
handle signals. This is an inefficient implementation of
one of the most central classes in GNOME Shell.
In addition to removing Shell.GenericContainer, then,
turn LayoutManager into a proper GObject.Object subclass.
This one was remarkably easy to port. In order to make it,
replace the Shell.GenericContainer handlers by a constraint
and simply replace it by a St.Widget.
projects / gnome-shell.git / log